A waterproof, bikepacking-inspired / urban-inspired seat pack bag that is quickly attached/removed via an ingenious quick-release seatpost mounting system. Ideal for the commuting trunk bag user who doesn’t want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Universal Rixen & Kaul CONTOUR MAX seatpost bracket with 2 sets of seatpost clamps. (25-32mm & 32-36mm) – 3kg load rating (not including bag weight). - 8mm Engineered aluminum frame provides stiffness and load stability. - *Not advised for carbon fibre or ultra-lightweight seatposts. - Intuitive waterproof roll-down closure system provides flexible load management. - Front external mesh pocket with Velcro closure. - Outer bungee system with wings, allows excess gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Ultra-visible three-way 3M triangle logos. - Polypropylene side stiffeners and dimensional foam top/bottom stiffeners provide additional load stability. - Supplemental rear closure strap system provides additional support. - Built-in U-lock holder. - Rear light clip. - Volume 12L / 732 cu/in - Weight 795g / 1.75 lbs (incl. bracket), 725g / 1.6 lbs (without bracket) - Dimensions 44x18x16-inches / 17.3-inches x7.1-inches x6.3-inches
$158.00 - $177.00
The Expedition Saddle Pack is lightweight, waterproof, and provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s designed to hold clothes and equipment on long distance rides. Built from a lightweight laminate developed specifically for Apidura, the Pack is highly resistant to abrasions and tears. The seams have been welded together, creating a waterproof seal that ensures contents always stay dry, even in sustained rain. A three-point attachment system with Hypalon-reinforced Velcro straps allows the Pack to hug the seat post, increasing stability and cutting down on lateral movement. Additional Hypalon on the Pack’s body keeps frames in good condition. The roll-down compression and closure system means the Pack’s volume can be tailored precisely to fit a range of packing needs. Materials The Expedition Saddle Pack is cut from a three-layer laminate fabric that was developed specifically for us. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, Woojin buckles have been chosen for their strength and reliability. Finally, a lightweight moulded section of HDPE thermoplastic sits in the Pack’s lower section to reinforce its structure.
$167.00 - $175.00
The Racing Saddle Pack is the first rear pack dedicated to ultra-distance competition and audax. Featuring a sleek design with a compact capacity, the Pack is ideal for storing light, compressible items over vast distances. Constructed from an ultralight, waterproof laminate developed for Apidura. The Pack weighs less than 210g and securely fastens with a sturdy three-point attachment system. It’s designed to fit ergonomically under the saddle, minimizing sway and reducing drag. Light attachment points are laser-cut into the fabric, increasing rider safety without adding unnecessary weight. A high-contrast reflective feature is specially designed to enhance visibility in all light conditions. A roll-top closure provides adjustable capacity, and tailored webbing, straps and buckles shed extra weight, while ensuring the simplest setup for ease of use, when every second matters. Materials The Racing Saddle Pack is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance competition and audax, the material is waterproof and lightweight, with strong tear and abrasion resistance. The attachment points are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the fastening system, we’ve chosen Woojin buckles for strength and reliability.
The Brooks Challenge Large Tool Bag is a saddle bag for fitment to the rear of a saddle bearing bag loops or over the handlebars. It features buckles located within the hold itself to ensure greater security while the strap that closes the unit encircles the bag's contents, preventing them from rattling during transit. The first Challenge was designed and patented in 1896. The Challenge Large has a lot in common with its distinguished predecessors, but now features triple the volume! - Width: 210mm - Height: 110mm - Depth: 70mm - Volume: 1.2L
The first Brooks Challenge was designed and patented in 1896. This tool bag is for fitment to the rear of saddle bearing bag loops. It features buckles that, while fastening the bag to the saddle, are located within the hold itself, thus ensuring greater levels of security. The strap that secures the unit encircles the tools it carries to prevent them from rattling during transit. - Width: 175mm - Height: 78mm - Depth: 45mm - Volume: 0.5L
The Hauler Bike Packing Bag is a convertible saddle/messenger bag that is lightweight and versatile for each rider. It’s an easy way to carry a substantial amount of cargo to keep on your bike without wearing a pack and can be used as a messenger once you’re off to work, school, or play. NOTE: Photos of bags may not reflect the actual color. Each one is made with Upcycled Nylon, so colors and prints will vary. Materials: - Upcycled Colored Fabrics - Nylon Teeth with Zinc Zipper - 10 oz Vinyl Waterproof Tarp - Nylon Fabrics - Hook & Loop - Nylon and Metal Hardware - Dimensions: 9 L x 5 H x 22 D in./228 x 127 x 558 mm - Capacity: 990 cu in./16.2 L - Weight: 17.6 oz/498.9 g Features: - Universal hook & loop mounting straps - Roll-Top design excludes the need for zippers - Easy access front pockets - Frame plate secured all side to protect cargo - Straps are minimized for cyclists safety - Built in Colorado - Made in the USA - Limited Lifetime Warranty
$74.95 - $89.95
Listen to your inner voice of adventure. Pack up your gear, get on your bike, and ride that epic trail. BackLoader is a large-capacity seat bag specially designed for bikepackers providing a streamlined way to carry gear without the need for a rear rack. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly. The upgraded saddle mount system, in conjunction with compression straps, reduces the pendulum effect associated with large rear payloads, providing a comfortable ride for those long miles. An easy-access waterproof inner bag is included to keep contents completely dry. - Polyethylene / Nylon — Lightweight, durable, water repellent and stain resistant - Hook and loop fastener - Waterproof Rating: 10,000mm (waterproof inner bag) - Max Load: 5kg / 11lb - Safety light clip - Air release button
Lezyne's XL-Caddy is an oversized, high-capacity saddle bag. Large rear opening provides easy access to main compartment. Labeled organizational pockets fit pump, multi-tool, and tire repair necessities. Two quick-access side pockets. Buckle system attaches to saddle rails; dual Velcro straps attach to seat post. Durable woven nylon construction. Reflective logos and loop increases night visibility. Water-resistant zipper with large pull loop.
Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported
The Medium Packer Seat Bag is the perfect seat bag with all the extra room needed for carrying the essentials. The Packer is the perfect accessory for commuting, bike packing, touring, mountain biking, road biking. - Roll up style closure with quick release buckles - Shock cord for mounting extra gear on top of bag - Reflective accents and light holder - Water resistant 840 denier nylon/TPU - 16” x 6” x 5” - Up to 550 cubic inches
Weighing next to nothing and unusually practical, the Cockpit-Pack helps to secure your personal fuel supply by giving you direct, one-handed access to your favorite snack while you continue to ride. The large opening ensures that you'll immediately find what you need. Whether you want quick access to your snack, smartphone or camera, they can all be optimally stowed in the Cockpit-Pack. Thanks to the stiffened material on the inside, the bag retains its shape at all times and can be easily opened and closed. The 82-gram, lightweight Cockpit-Bag is waterproof and attaches easily with its extra strong Velcro straps to your top tube and head tube or to your top tube and seat tube. - Waterproof Cockpit-Pack with zipper - Ideal pack for bikepacking, alp crossing, bike races and trekking tours - Light weight, sturdy PU laminated rip stop nylon fabric - Allows quick access e.g. to mobile phone or snack - Easy to open with one hand (internal stiffener) - Strong hook and loop fasteners for mounting to top tube, head tube or seat tube - Can be mounted to carbon frames - Maximum capacity: 1 kg/2.2 lbs. - Fits on MTBs (full-suspension and hardtails), road bikes and hybrid bikes - Can also be attached to your top tube and seatpost
The Starter Kit has all of the basic necessities required to get you out riding prepared and safely. It contains two bottle cages, a durable, efficient pump, tire levers, and a water-resistant saddle bag to house it all. - Mini Wedgie saddle bag provides 48.5 cu. in. of easily accessible storage—ample room to house tire levers, small pumps, and basic nutrition. It's also treated to be water-resistant, and features an internal neoprene sleeve to safely hold tools. - Two Roll Cage bottle cages are light, dependable, and easy on the eyes, making them the perfect solution to your hydration needs. - Air Tool Flex Road pump is lightweight, durable, and features a twin Presta and Schrader valve on the T-Head. It's hose has built-in flex to alleviate stress on the tube's valve, while its inverted barrel design is efficient and allows for easy, high-volume pumping.
A high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip - Volume 1.3 L / 79 cu in - Weight 126g / 0.28 lbs
Not only does Banjo Brothers' Minnehaha Canvas Saddle Bag give you huge carrying capacity, it classes up any ride. You can pack a picnic and extra clothes while the 3-point attachment and hardwood internal support keep the load stable. The main panel of the bag boasts a durable, layered 18-ounce canvas construction and the bottom is reinforced with a riveted plate to keep your bag from sagging under load. Clever details include detachable reflective tabs, an interior wallet pocket and exterior lashing points so you can attach a jacket or walking shoes.
Designed to store the essentials to repair a mid-ride mechanical, our Expedition Tool Pack is a sleek, ultra-compact pack that’s excellent for short rides and bikepacking adventures. Fitting neatly under the saddle, the tool bag attaches securely to the bike with a Velcro-backed Hypalon strap that’s effective even when exposed to road spray and grit – a weakness of traditional zippers and buckles. Inside, there’s enough capacity for two spare road tubes, tire levers, a small multi-tool, and a CO2 canister. The exterior of the tool bag is protected by a tough, lightweight fabric that’s completely waterproof. Reflective graphics and a light attachment point add visibility in low light. Features - Ultralight construction, weighing only 40g - Hypalon-reinforced Velcro strap gives a secure hold in all conditions - Wide opening, allowing easy access to contents when detached - Light attachment point and reflective graphics for increased visibility - Lightweight waterproof laminate, developed specifically for Apidura Materials - The tool bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. - The tool bag’s strap is reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. Care - Wash the tool bag by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.
Lezyne's M-Caddy with Sport Repair Kit is a complete and convenient kit for the rider with simple reliability in mind. It features a Sport Drive HP hand pump, RAP 6 multi-tool, Smart Kit for tire repair, and Matrix tire levers in an M-Caddy bag that tucks neatly under your bicycle seat. Be prepared with all the essentials needed for an unexpected repair whether you're out on a long weekend jaunt or daily commute.
No rack, no problem. Banjo Brothers' Waterproof Saddle Trunk has a whopping 400 cubic inches of space with a waterproof main compartment and outer pockets for easy access to smaller items. A webbing loop on top lets you lash a jacket to the bag so you can reach it before the rain comes. An interior aluminum strut, stiff hull and 4-point strapping system control the load from bouncing, rattling or swaying. The best part is when you're done with your ride, you can remove it quickly and it works on pretty much any bike. - Weight: 1.25lbs - Dimensions: 12.5" L x 7" H x 6.5" W - Capacity: 400 cubic inches / 6.6 liters - Waterproof main compartment with replaceable welded liner - Outer pockets for easy access to money or keys - Webbing loop on top for attaching a rain jacket or other gear - Interior aluminum strut, stiff HDPE hull and 4-point strapping controls loads
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - AirLift mini frame pump with a large chamber, locking handle and carrying mount
Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures
This wedge bag has two compartments with foam inserts to keep tools jiggle free. - Features durable 1000 denier, wrap-around zipper, extra-long 3M reflective strip for added safety at night and a zippered expanding main compartment for added storage. Mounts and removes quickly with the innovative QuickClick system. - Built-in rain covers and two-piece rail fixer for easy removal Tool Kit Includes: - 2, 3, 4, 5, and 6mm Allen wrenches - T25 Torx - Phillips screwdriver - 8 and 10mm open wrenches - Universal Chain Tool with chain hook - 2 Tire Levers - Flypaper Glueless Patch Kit
XLAB has designed the first aerodynamic repair storage bag for single rear systems with their Aero Pouch 300. It sports a compact, sleek design while carrying a great deal of essential repair tools. • Fits around the bottle cage on all metal XLAB single rear systems • Simple install by using the 2 bottle cage holes • Actually helps the drag behind you by collecting the air into a smooth airflow • Velcro zipper pull stays down to avoid zipper flapping drag Includes: • AERO POUCH 300 bag • All required hardware for mounting onto metal DELTA systems • Installation Instructions Material: • Tough woven nylon • Rigid insert to maintain shape • Weight: 107 grams Fits all metal XLAB single rear systems • DELTA 300 • DELTA 400 • DELTA 425 • DELTA SONIC • DELTA SONIC XL
This seat pack with its convenient adapter system offers you an elegant means of stowing an additional amount of critical gear. The Saddle-Bag Two is a redesigned ORTLIEB classic, a seat pack that is so practical that it belongs on every bike tour! The 1.6-liter version (ideal for road bikes and mountain bikes) of the waterproof Saddle-Bag Two provides a secure place for a bike-repair kit, a smartphone, or other items. The 4.1-liter version offers almost as much storage space as a small backpack, making it an ideal supplementary pack when you have a lot to carry. Thanks to the pack's roll closure and side buckles, everything you stow remains snugly packed and easy to access. The Saddle-Bag Two attaches directly to your bike seat with an adjustable snap buckle. The intuitive adapter allows you to quickly attach the pack to or detach it from your bike. Moreover, the snap buckle is compatible with all previous Saddle-Bag Two models so that you could use it on different bikes. A Velcro strap that attaches to your seat stem provides additional stability, effectively preventing any unwanted shifting. Another advantage in the case of the large pack is that it doubles as a rear fender, keeping spray water off your back. Further Features: - PVC-free, polyurethane-coated nylon fabric - Ideal for use with mountain bikes, road bikes, and touring bikes - No protruding plastic parts on the inside - Adjustable attachment below your bike seat - Velcro strap compatible with seat-stem diameters of up to 34.9mm (e.g. the Birdy folding bicycle) - Scotchlite 3M reflector for added protection at night - Daisy chain for the optional attachment of a rear light
The X-Large Seat Pack mixes a low-profile, aesthetically pleasing shape with ample storage room (10x7x20cm) for your largest riding essentials. It attaches to the saddle easily via hook-and-loop straps, and it features a roll-up closure to keep its contents safe. You'll also find a reflective patch at the rear that increases your visibility to motorists in low-light conditions. - Secure attachment to the saddle with easily adjustable hook-and-loop and silicone straps to go around the seatpost. - Roll-up closure for ultimate flexibility of what you can carry and excellent water-resistance. - Expansion zippers for when you need to fit in more than you ever imagined. - Reflective patch on back that also allows for a Stix light to be clipped on securely with the fabric clip. - Dimensions (cm): 10 x 7 x 20
BiKASE's Wing Side Open Seat Bag offers easy access to your belongings. No more reaching way back and trying to find your stuff as compared to rear entry bags. It features external pockets for small items and attaches easily with molded nylon T bracket and 2 hook & loop straps. With 110 cubic inches of storage capacity, it will even hold a windbreaker for those longer rides when the weather changes! Will hold a fat tire tube as well. • 2 side pockets • 2 Teflon coating mesh pockets • Webbing light holder/Rear reflective dots • PE stiffener structure • Universal-fitting T-bar mount • 2 Velcro straps for seat post mounting • Material: 840 denier nylon • Teflon coating fabric • Size: 20cm x 11cm x 10cm • Volume: 1.8 Liter • Weight: 180 g
Topeak's SideKick Wedge Pack features a unique, positive locking 2-piece mount that makes attaching and removing the pack a snap. Its unique side-opening design makes accessing your gear quick and easy and you'll have plenty of room for carrying tubes, a C02 pump, wallet, keys and whatever else you need. For low-light conditions, a 3M reflective strip adds safety and its semi-rigid construction makes the Wedge Pack durable and tough.
The Large Seat Pack mixes a low-profile, aesthetically pleasing shape with ample storage room (10x6.5x18cm) for your larger riding essentials. It attaches to the saddle easily via hook-and-loop straps, and it features a roll-up closure to keep its contents safe. You'll also find a reflective patch at the rear that increases your visibility to motorists in low-light conditions. - Secure attachment to the saddle with easily adjustable hook-and-loop and silicone straps to go around the seatpost. - Roll-up closure for ultimate flexibility of what you can carry and excellent water-resistance. - Expansion zippers for when you need to fit in more than you ever imagined. - Reflective patch on back that also allows for a Stix light to be clipped on securely with the fabric clip. - Dimensions (cm): 10 x 6.5 x 18
Specialized's Stormproof Small Seat Pack provides you with all the storage (7.5x4x15cm) you need for your smaller gear in a low-profile, fully waterproof package. It features an expandable, zippered compartment, so you'll never run out of room for the essentials, plus a roll-up closure system that keeps its contents safe and secure. And knowing that you'll be using it as your go-to for inclement weather, they've included a reflective patch at the rear, as well as clip-mount for a Stix light, in order to increase your visibility to motorists in low-light conditions. - Saddle Mount offers secure attachment to the SWAT mounts on Specialized saddles. - Optional strap for use with non-Specialized saddles. - Roll-up closure for ultimate flexibility of what you can carry and fully waterproof construction. - Reflective patch on back that also allows for a Stix light to be clipped on securely with the fabric clip. - Dimensions (cm): 7.5 x 4 x 12
A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 0.8 L / 51 cu in - Weight 72g / 0.16 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating; Red interior liner improves internal visibility - Lightweight Velcro saddle-mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior ID pocket - Ultra-visible 3M triangle logo - LED light clip
Not only does Banjo Brothers' Minnehaha Canvas Saddle Bag give you extra carrying capacity, it classes up any ride. It uses leather straps to securely attach to your saddle at three different points to reduce sway and the front is tapered for leg clearance. With plenty of room for a tool kit, lunch, rain jacket, etc., you'll never be without your gear. The shaped interior supports your gear without sagging and you've got leather reinforcements in all high-wear areas, too. Clever details include a leather tab for lashing extra gear or attaching a blinkie, detachable reflective tabs, an interior pocket and a key clip.
A compact roll-up with three compartments and internal organizers to keep gear and small items neatly in place. The durable water-repellent and stain-resistant coating keeps contents dry and cleans up easily. Secure strap provides tool-free mounting to frame tube, seat post or to saddle rails. - 3 Compartments - Material: Polyethylene / Engineering grade polymer. Durable water-repellent and stain-resistant coating. - Bag Attachment: Secure strap - Mount: Saddle rails, underneath top tube - Size: 15 x 10.5 x 2cm / 5.9" x 4.1" x 0.8" - Weight: 91g / 3.21oz Compatibility - Fits inner tube sizes: 26" x 1.75 - 29" x 19/2.35 and 700c. - Topeak CO2 inflater, CO2 cartridges, tire levers
Page 1 of 4 Next page