Filter By:
Hubs

$747.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.

$714.90 - $733.90
Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black.
- Dimension: 12x142mm

$485.00
Boost Centerlock rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and a threaded driveshell seal ring.
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Easily serviceable with a T10 Torx and pick or pen knife
- Specifically designed for "BOOST" 148mm x 12mm axle standard
- Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty
- Hub Drilling: 32
- Skewer Included: No
- Hub/Brake Compatibility: Center-Lock Disc

$476.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

$476.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

$459.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible

$383.90
Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.

$269.99 - $299.99
- Elite Series convertible cyclocross/gravel hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Use: Rear Hub
- Drilling: 28H
- Material: AL6061
- Color: Blk
- Brake Type: 6B
J-Bend Spoke/Quick Release Axle:
- OLD: 135mm
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 32.95mm
- LTF-R: 48.45mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
Straight Pull Spoke/Quick Release Axle:
- OLD: 135mm
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 36.2mm
- LTF-R: 50.1mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
J-Bend Spoke/12mm Thru-Axle:
- OLD: 142mm
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 36.45mm
- LTF-R: 51.95mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
Straight Pull Sple/12mm Thru-Axle:
- OLD: 142mm
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 39.7mm
- LTF-R: 53.6mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm

$269.99 - $299.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano/SRAM 8-11s and XD cassette body options with 6 pawl/54 point/6.6° engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
J-Bend SPECIFICATIONS
- OLD: 148mm
- Left Flange Diameter: 58mm
- Right Flange Diameter: 458mm
- Left Locknut-To-Flange: 36.65mm
- Right Locknut-To-Flange: 51.35mm
- Left Center-To-Flange: 37.5mm
- Right Center-To-Flange: 22.8mm
Straight-Pull SPECIFICATIONS
- OLD: 148mm
- Left Flange Diameter: 55mm
- Right Flange Diameter: 55mm
- Left Locknut-To-Flange: 39.5mm
- Right Locknut-To-Flange: 53.8mm
- Left Center-To-Flange: 34.65mm
- Right Center-To-Flange: 20.35mm

$269.99 - $299.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
J-Bend/QR:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 32.95mm
- LTF-R: 48.45mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
J-Bend/142 x 12mm:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 36.45mm
- LTF-R: 51.95mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
Straight Pull/QR:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 36.2mm
- LTF-R: 50.1mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
Straight Pull/142 x 12mm:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 39.7mm
- LTF-R: 53.6mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm

$259.99 - $269.99
- Elite Series convertible fat bike hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- J-bend spoke compatible
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
Quick-Release:
- LTF-L: 48.65mm
- LTF-R: 48.65mm
- CTF-L: 36.5mm
- CTF-R: 36.5mm
12mm Thru-Axle:
- LTF-L: 52.15mm
- LTF-R: 52.15mm
- CTF-L: 46.5mm
- CTF-R: 46.5mm

$249.99 - $269.99
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/QR Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 32.75mm
LTF-R: 50.05mm
CTF-L: 34.9mm
CTF-R: 17.6mm
Straight Pull Spoke/12mm Thru-Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 36.25mm
LTF-R: 53.55mm
CTF-L: 34.9mm
CTF-R: 17.6mm
J-Bend Spoke/QR Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 32.65mm
LTF-R: 48.2mm
CTF-L: 35mm
CTF-R: 19.45mm
J-Bend Spoke/12mm Thru-Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 36.15mm
LTF-R: 51.7mm
CTF-L: 35mm
CTF-R: 19.45mm

$223.90 - $267.90
Reliability meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

$265.00
Boost Centerlock front hubs are designed as precision mountain tools. Featuring a one-piece axle to provide a stiff hub with rail accurate steering. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra-low drag.
- Wide flange placement
- Fits 110x15mm Boost spacing
- Easily serviceable with a T10 Torx and pick or pen knife
- Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty
- Hub Drilling: 28
- Hub/Brake Compatibility: Center-Lock Disc
- Color: Black
- Spoke Interface: J-Bend
- Front Axle: 15mm Thru x 110mm

$259.90
Reliable, simple, and e-bike specific hub.
To withstand the higher torque of e-drive systems, the 350 hybrid is equipped with steel rotors and a specific 24T ratchet out of hardened steel. Oversized bearings ensure smooth running under extreme conditions.

$209.99 - $249.99
- Elite Series road hubs
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- Sealed bearings
- Material: AL6061
- Brake Type: Rim
- OLD: 130mm
Straight Pull Spoke:
PCD-L: 32mm
PCD-R: 52.5mm
LTF-L: 27.7mm
LTF-R: 50.8mm
CTF-L: 37.45mm
CTF-R: 14.35mm
J-Bend Spoke:
PCD-L: 38.5mm
PCD-R: 50.6mm
LTF-L: 27.45mm
LTF-R: 49.05mm
CTF-L: 37.7mm
CTF-R: 16.1mm

$249.99
- HEX DRIVE 102T technology delivers 3.5° engagement for almost instant pickup
- 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click
- Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel
- Forged and CNC weight-optimized alloy hub body
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Advanced seal system improves prevention of bearing/drive system contamination
- QR end caps included with all hubs
- Cassette/Driver: choose; Shimano HG-11, or Scram XDR
- Axle/Spacing: 12x142mm Thru Axle (includes 10mm QR endcaps)
- Hole: 28h

$249.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup
- 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click
- Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Advanced seal system improves prevention of bearing/drive system contamination

$249.99
- Ultra-tough 5 bearing Single Speed rear hub for All Mountain, DJ, FR, Pumptrack, and BMX.
- Integrated 3mm 11T Cog Freehub (for 1/8" SS Chains)
- Female Axle, M10 Lock-down Bolts, Alloy End-Caps
- Wide Flange design eliminates dish in rear wheel, maximizing wheel strength & stiffness
- Hole count: 32H
- 6-bolt

$244.99
Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
- Rotor lockring not included
- Hub Center to Flange: 30.0mm
- Hub Drilling: 32-hole
- Flange Diameter: 92.5mm
- Drivetrain Speeds: 8
- Spoke Interface: J-Bend

$235.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

$235.00
The R45 front hub is built to address our road and cross riders’ demands for Chris King performance in a lighter weight and more aerodynamic package. Defined by a narrow hub body and low flanges the R45 front hub is a sleek base for the fastest wheels.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
- Engineered, manufactured and assembled in Portland, Oregon USA
- 5-year built-to-last warranty
- Legendary made-in-house bearings
- Easily serviceable and completely re-buildable with our R45 Hub Service Tool

$230.00
DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike.
• Accepts 6-bolt rotors

$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
Page 1 of 6
Next page